An installation kit is included in the packaging. Follow the instructions below:
1. Select the right place on the wall.
2. Place the mounting template on the wall, making small marks where the holes are to be
located.
3. Remove the mounting template and drill holes in the wall.
4. Insert the plugs into the holes made.
5. Place the protectors (Nº2) in the anchors (Nº3) as shown in the diagram.
6. Screw the metal anchoring pieces to the wall (Nº3) with the Ø 6 x 50 mm screws (Nº4).
7. Place the product on the supports (Nº3).
Nº.
ITEM
1
10 mm Rawl Plug
2
Plastic pads
3
Fixing metal fastener
Ø
4
Screw
5
Product
4. SCREEN & KEYPAD
The control panel consists of 7 LEDs and 4 mechanical mechanical buttons with the
following functionalities:
1 2 3 4 5 6
7
10
6 x 50 mm
1 2 3 4
5 6 7
4
LED indicators
Power / Stand-by / Confirmation button
Increase temperature button
Decrease temperature button
Maximum power button
Infrared sensor
3
1
2
5