5. FUNCTIONALITY AND PROGRAMMING
5.1. POWER ON AND OFF
To turn on the product, press the button
again.
5.2. SET POINT TEMPERATURE SELECTION
You can regulate the set temperature of the towel rail by the buttons
key increases the setpoint temperature. In the same way, pressing the
the setpoint temperature.
The minimum operating temperature is 7ºC and the maximum is 30ºC. The factory set
temperature is 21ºC. The 6 LED indicators, located in the upper part of the control panel,
identify the established setpoint temperature.
When the room temperature is lower than the selected temperature, the heating element
is activated.
To indicate that the product is consuming, the last LED indicating the temperature will flash
slowly.
Indicator
Led 1: short
blink every 2
seconds
Led 2: OFF
1 LED
Led 3: OFF
Led 4: OFF
Led 5: OFF
Led 6: OFF
Indicator
Led 1: ON
Led 2: ON
2 LED
Led 3: OFF
Led 4: OFF
Led 5: OFF
Led 6: OFF
LED
Temperature
7ºC
LED
Temperature
18ºC
LISSE OVAL ELECTRIC TOWEL RAIL
once. To turn off the product, press the button
Indicator
Led 1: ON
Led 2: OFF
Led 3: OFF
1 LED
Led 4: OFF
Led 5: OFF
Led 6: OFF
Indicator
Led 1: ON
Led 2: ON
3 LED
Led 3: ON
Led 4: OFF
Led 5: OFF
Led 6: OFF
and
. Pressing the
key reduces
LED
Temperature
15ºC
LED
Temperature
21ºC
EN
11