Part 5 - Machine Use; Controls - ICC RONER R PLUS Manual De Instrucciones

PART 5 - MACHINE USE

5.1 - Controls

START button: starts the cooking cycle.
OFF button: stops the work cycle.
UP and DOWN buttons
-
They are used to set the temperature and time values.
-
With the machine in “STOP” mode, pressing the + or - button allows for
directly accessing 25 custom programmes.
MENU
MENU button
-
Press for 4 sec. after choosing the working program to modify the time and
temperature of a program
-
Press it after selecting the processing programme for delaying the start.
DISPLAY DISPLAY button
-
Press it to change the mode on the display from time to temperature at any
time, both during the current programme and during the programme setting
phase.
-
Shows in sequence: Set temperature / Actual temperature / Set time / Time
remaining of the current programme.
-
Press and hold the DISPLAY button for 4 seconds to switch from °C to °F.
Display: four-digit, includes the temperature, time
and description of the various pre-set programmes.
After 10 seconds of non-use, without any programme
being selected, the display will show the STOP status
alternating with the detected temperature
Temperature LED: located beside the
display, it lights up when, during the work
cycle, the display shows the operating
temperature.
It flashes while the temperature is being
modified.
Timer LED: located beside the display, it
lights up when, during the work cycle, the
display shows the processing time.
It flashes while the time is being modified.
11