Automatic Modes; Weekly Programming Modes - Rointe PALAOS PIW1000RAD Manual De Instalacion Y Uso

Idiomas disponibles

5.5. AUTOMATIC MODES

In Automatic mode, the product regulates the temperature according to the daily programme

created by the user, using the temperatures previously set in the Comfort and Night modes.

To switch from ANTI-FROST mode to PROGRAMMING mode, press the

MODE button again.

The word "PRO" will appear on the screen with an arrow pointing to the clock

symbol (located at the bottom right of the screen). In the "clock" section of

the screen, the current time of day is displayed, only if the time and day of the

week have been set correctly when the product is first switched on.

The programming schedule is displayed on the left side of the screen by a

succession of lines that representing 24 hours of the day. An arrow at the top

of the screen indicates the operating mode (Comfort or Night).

The temperature selected for that mode is shown on the display.

To modify the temperatures of the Comfort or Night modes, access the

corresponding mode and then use the

buttons to modify the temperature parameters.

In order to proceed to the weekly programming, you must:

Have established the correct time and day of the week.

Be in PROGRAMMING mode (press the

on the screen. "FP" will appear first, then "PRO".)

PALAOS VERTICAL DIGITAL RADIATOR

INCREASE and

MODE button for 5 seconds until "PRO" appears

DECREASE

Tabla de Contenido