Publicidad
Idiomas disponibles
Idiomas disponibles
In this mode, it is possible to program each day of the week independently.
1. Select the day with the
(D1 = Monday, D2 = Tuesday, etc.). Press the
All the time bands for the day will then be displayed.
2. The lower screen shows the time interval that must be programmed for each hour.
Press
INCREASE to activate the Comfort mode temperature OR the
activate the Night mode temperature for that hour. Comfort mode is indicated by a strip
on the side bar. After each selection, the time
interval will progressively advance (00h, 01h, 02h, 03h...).
3. The strips will only been seen for the time bands that are active in Comfort mode.
4. Once you have configured all hours of the day, press the
select the remaining days you wish to program e.g. D2 - D7.
5. Press the
Example
Set the Comfort mode on Fridays from 7am to 9am, and from 5pm to 9pm keeping the rest
of the day in night mode:
Press for
5 seconds until "PRO" appears.
Choose Friday (D5) by pressing the
The display will show the time bands (00h, 01h, 02h, 03h etc.), starting from
midnight onwards, which means that the first time slot is from midnight to one in the
morning.
In this case, as you want to activate Night mode until 7am, press
program 00h - 07h as Night mode. If Night mode has been set at 15ºC, the radiator will be
activated at 15ºC from midnight to 7am.
Now you can set the Comfort mode in the time band from 7am to 9am by pressing the
key twice. You will see this activation in the side strips. If Comfort mode has been set at
21ºC, the radiator will be activated at 21ºC from 7am until 9am.
Then set Night mode until 5pm by pressing
Then set Comfort mode from 5pm to 9pm by pressing
Then set the remaining hours (9pm - midnight) in Night mode by pressing
20
INCREASE and
MODE button for 5 seconds until the word "END" appears to save.
button 5 times and then press
DECREASE buttons
MODE button to confirm.
MODE button once and then
button 8 times.
4 times.
DECREASE to
to confirm.
7 times to
3 times. To
Publicidad
