Publicidad
Idiomas disponibles
Idiomas disponibles
Scope of delivery
1
A
B
2
Dimensions
Important notes on commissioning, assembly and use
The TDSW-01 is compatible with Jarolift radio motors Uni 78 Funk / Uni 78 NHK Funk and external radio receiver
TDRRUP-M.
The sensor is powered by an integrated solar cell, but can also be powered by the battery for up to two weeks wi-
thout sunshine.
To charge the battery, place the sensor in a location where it can receive direct sunlight.
If the sensor is not used for a longer period of time (e.g. winter), please remove it and store it in a dry place.
The display of the sensor switches off automatically approx. 20 seconds after the last input to save power. The display
is reactivated as soon as a key is pressed on the sun / wind sensor.
The sensor must be mounted in a place where the values for sun and wind can be measu-
red well. The sensor must not be placed in a niche or under a roof.
Please note that other transmitting devices (e.g. radio headphones, baby monitors, radio
weather stations) whose transmission frequency is identical to that of the sensor may
interfere with the signal and reception.
SCOPE OF DELIVERY / DIMENSIONS / IMPORTANT NOTES
C
50 mm
55 mm
120 mm
1
Sun / wind monitor TDSW-01
A Rotatable universal console for ceiling and wall mounting
B Solar panel
C Wind turbine
2
2 Screws
Assembly and operating instructions
98 mm
4,2 mm
17
Publicidad
