Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE SENSOR / TEST MODE
Test mode
To activate the test mode, first switch on the display. Press any key for this purpose.
Please note!
The test mode only works with activated wind control with an already defined km/h value (value 1-5 - see page 9).
Test mode "Wind".
1.
To determine the current wind speed, press the "Wind intensity" key 4 times.
2.
The display shows the currently measured wind speed (e.g. "1.0" = wind speed 10 km/h).
3.
To exit the wind test mode, press the "Sun intensity" key.
Press "Wind intensi-
Test mode "Light".
1.
To determine the current light value, press the "Sun intensity" key 4 times.
2.
The display shows the currently measured brightness value (e.g. "12" = brightness value 12 klux).
3.
To exit the light test mode, press the "Wind intensity" key.
Please note!
The test mode only works with activated sun control with an already defined lux value (value 1-9 - see page 9).
Press "Sun intensity"
Note:
If the measured light value is less than 1,000 lux, the value "00." is shown in the display.
If the currently measured light value exceeds 100,000 lux, the display will show "99." in the display.
ACTIVATING THE SUN / WIND CONTROL VIA HANDHELD TRANSMITTER
To activate the sun / wind control, press the UP and DOWN keys of a taught-in hand-held transmitter simultaneously and release
them again. Then briefly press the STOP button and then briefly press the UP button.
The controlled motor will confirm the activation of the sun / wind control with a short vibration.
Briefly press
AUF/AB-Taste
UP/DOWN
kurz gleich-
key simulta-
neously and
drücken und
release again
wieder los-
20
ty" key 4 x
key 4 x
zeitig
lassen.
Currently measured
wind speed is dis-
played.
Currently measured
brightness value is
displayed.
Press the
STOP key
STOPP-Taste
briefly and
kurz
drücken und
release it
wieder los-
again.
lassen.
Press the "Sun inten-
sity" key to exit the
test mode.
Press the "Wind
intensity" key to exit
the test mode.
Briefly press
the UP key
AUF-Taste kurz
and release it
drücken und
again.
wieder los-
lassen.
Motor vibra-
Motor vibriert.
tes.
Publicidad
