Dismantling And Disposal - ALFRA 03200SET.NG Manual De Instrucciones

12. DIsMantlIng anD DIsPosal

caution!
!
there is a risk of injury when lifting the unit in its packaging or if the lifted unit falls
(total weight approx. 60 kg).
• Please note the maximum weights that may be lifted by persons. It may be necessary to use
lifting gear.
• Do not stand below the lifted unit.
• Wear your personal protective equipment, in particular gloves and safety work shoes, also for the
dismantling and disposal of the unit (see section 2.4 "Personal protective equipment").
• To switch off the hydraulic pump, turn the mains switch to the "0" position.
• Remove the ventilation screw and close the tank opening with the screw plug to prevent hydraulic fluid
from escaping.
• Disconnect the supply cable of the foot-operated switch from the 4-pin connection.
• Disconnect the hydraulic hose from the hydraulic connection and the electrical control cable from the
electrical connection of the unit.
• When the hydraulic pump is switched off or the hydraulic system is pressurefree, the hydraulic hose
can be disconnected safely without any hydraulic fluid escaping
The "busbar bending and hole-punching unit" must be disposed of or recycled appropriately in
accordance with the country-specific regulations.
28