Safe operation
Do not expose the pump to rain or use it in a wet or damp environment.
Do not use the unit, if electrical lines or the housing are damaged.
If a power connection cable is damaged, have it immediately replaced by OASE, an authorised
customer service or a qualified electrician to prevent electric shock.
Do not carry or pull the unit by its power cable.
Route lines in such a way that they are protected from damage and do not present a tripping
hazard.
Never carry out technical changes to the unit.
Only carry out work on the unit that is described in this manual.
Only use original spare parts and accessories.
Intended use
Only use the product described in this manual as follows:
For transferring water from and draining basins or ponds/pools.
For irrigating and watering.
For pumping clear water or rain water.
Extraction of water from a well.
– Only for irrigation and watering purposes!
For pumping the water out of water butts/rain barrels or cisterns.
– Size of the particles in the water: max. 2 mm.
To boost the pressure of the mains water.
– Max. permissible internal pressure of the pump on the pressure side: 6 bar
While adhering to the technical specifications. (→ Technical data)
The following restrictions apply to the unit:
Do not use for long-term operation (e.g. continuous recirculation of the water in a pond).
Not suitable for salt water.
Never use for pumping dirty water/waste water.
Do not connect to the drinking water supply.
Not suitable for drinking water.
Do not use for commercial or industrial purposes.
Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
EN
11