Storage/winter protection
The unit is not frost-proof and has to be removed and put into storage if minus temperatures
are expected.
How to correctly store the unit:
Drain the water remaining in the unit, in the hoses, pipes and connections as much as possi-
ble.
Thoroughly clean the unit.
Check the unit for damage and replace damaged components.
Store the unit in a dry and frost-free place.
Protect open plug connections from moisture and dirt.
Malfunction remedy
Malfunction
Pump does not start.
Pump switches off after a short
running period.
The pump is not delivering, or the
delivered quantity is insufficient.
16
Cause
The pump is switched off.
Power supply interrupted
The fault current protection device
has tripped.
Overload protection has switched
the pump off due to overheating.
Blockage on the suction side
The pump is not sufficiently filled
with water.
Pressure line blocked
Suction line blocked
Leak on the suction side
External pre-filter (optional)
clogged
Remedy
Switch on the pump.
Check the electrical plug connec-
tions.
Switch off the pump and discon-
nect the power plug. Then contact
the OASE Service.
Clean the connection on the
suction side and the suction
line.
Allow the pump to cool down.
Clean the intake and suction
line.
Fill the pump and ensure that the
water does not flow out on the
pressure side.
Open the water withdrawal
point on the pressure side.
Route the pressure hose with-
out kinks
Clean the connection on the
suction side and the suction line
Route the suction hose without
kinks
Eliminate leak on the suction side
Clean the pre-filter