Installation; Installation Area - EAS ELECTRIC EMW580E3 Manual De Instrucciones

INSTALLATION

Installation

Installation area

Warning!
！
• Stability is important to prevent the product
from wandering! Make sure the machine is
standing leveled and stable.
• Make sure that the product does not stand
onto the power cord.
• Make sure to maintain the minimum distances
from the walls as shown in the picture
Before installing the machine, the location
characterized as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0°C
5.Keep far away from the heat sources such as coal or gas
burning appliances.
Unpacking the washing machine
Warning!
！
Packaging material (e.g. Films, Styrofoam)
•
can be dangerous for children.
•
There is a risk of suffocation ! Keep all
packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packaging.
Make sure the small triangle foam (a) is removed with the
bottom packaging together. If not, lay the unit down on the
side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain
hose.
4. Remove the inlet hose from the drum.
11
w
w
W> 20mm
a
V.3