Descargar Imprimir esta página

Extremis STICKS Manual Del Usuario página 8

Ocultar thumbs Ver también para STICKS:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45
STICKS WITH LED
Up to 10 bases can be fixed to each other with only 1 power supply. The cables attached to the LED lights are
always connected to the adjacent base. The first bases cable must be connected to the power supply.
1. Begin by placing all the bases in (approximately) the
desired position and then turn them over.
3. Then screw the male and female parts together so that
they are also watertight.
Choose the hole nearest to the next base.
8
sticks with LED
2. Next, link them to each other by clicking the male
connector into the female (attaching the long cable to
the short cable). Make sure the positioning lip is in
the right place.
RUBBERWOOD BASE
RUBBER BASE
4. Now click the connectors and cables into the holes
provided in the underside of the base so that they are
tidied away properly.
5. Screw the sealing cap onto the male connector for the
last base.

Publicidad

loading