OHAUS Defender 3000 Serie Manual De Instrucciones página 5

Defender 3000 Series U-Pallet Scale
TABLE 1. FLOOR SCALE WIRING COLOR CODE
Indicator Signal Name
EXC+ (IN+)
SEN+
SIG+ (OUT+)
SIG- (OUT-)
SEN-
EXC- (IN-)
Shield (GND)
OPERATION
For setup, calibration, and proper operation, refer to the instruction manual supplied with the indicator. Refer to the
specifications section for capacity, and readability information.
Operating Limits
Maximum Central
Model
1
load
i-DFP1500B1
i-DFP1500C1
The Defender 3000 Series U-Pallet Scale is designed for an evenly distributed load of 1500 kg
Loading/Unloading the Pallet Scale

Place the load on the scale with a hand pallet truck, crane or forklift. Ensure that the load is not
swinging when it is placed on the U-Pallet scale.

Remove the load by raising it at least 10 cm above the U-Pallet scale before moving or repositioning.
Floor Scale Wire Color
Green
Yellow
White
Red
Blue
Black
Yellow/Green
TABLE 2. MAXIMUM ADMISSIBLE LOADING.
Maximum Side
2
load
2250 kg
RECOMMENDED
2250 kg
RECOMMENDED
For continued best operating performance:

Avoid falling loads, shocks and hard lateral impacts

When weighing, all items should be centrally located on the U-Pallet
scale frame.

The forks of a pallet truck, crane or forklift must not be touching the scale
during weighing.

Never move the scale when weighing

Verify the calibration of the U-Pallet scale system at regular intervals.
TABLE 2. FLOOR SCALE WIRING COLOR CODE
Indicator Signal Name
EXC+ (IN+)
SEN+
SIG+ (OUT+)
SIG- (OUT-)
SEN-
EXC- (IN-)
Shield (GND)
One Side Corner
3
Load
NOT
RECOMMENDED
NOT
RECOMMENDED
Floor Scale Wire Color
Green
Yellow
Orange
Red
Brown
Black
Yellow/Green
NOT
NOT
EN-3