Technical Data; Power Requirements - Truper MOTO-AI Manual De Instrucciones

Technical Data

Code
Description
Voltage
Speed
IP Grade
Jaw
Rechargeable Battery
Input
Charger
Output
WARNING
Avoid the risk of electric shock or severe injury. When the power cable gets damaged
it should only be replaced by the manufacturer or at a
The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use.
Do not expose to rain, liquids and/or dampness.
Before gaining access to the terminals all power sources should be disconnected.
WARNING

Power Requirements

Ampere
Capacity
From 0 and up to 10 A
From 10 and up to 13 A
From 13 and up to 15 A
From 15 and up to 20 A
WARNING
When operating power tools outdoors, use a
extension cable labeled "For Outdoors Use". These extensions are especially designed for
operating outdoors and reduce the risk of electric shock.
Voltage: 7.2 V
Number of
Conductors
3 (one grounded)
* It is safe to use only if the extensions have a built-in artifact for over current protection.
AWG = American Wire Gauge - Reference NMX - J - 195 - ANCE
MOTO-AI
102271
Cordless rotary tool
7.2 V
5 000 RPM - 25 000 RPM
IP 20
1/8"
Capacity: 0.9 Ah
Voltage: 127 V~
Voltage: 9 V
Power Cord Grips used in this product: Type "Y".
Tool Build Quality: Reinforced insulation
Extension Gauge
From 6 ft to 49 ft
18 AWG
16 AWG
14 AWG
8 AWG
Type: lón-Litio
60 Hz 0.2 A
0.5 A
Authorized Service Center.
| Higher than 49 ft
16 AWG
14 AWG
12 AWG
6 AWG
grounded
ENGLISH
3