Assembling - Optika Italy B-510 Serie Manual De Instrucciones

8.

Assembling

1. Insert the optical head above the stand and tighten the screw.
(Fig. 1)
• Hold the head with one hand during the locking in order
to avoid that the head falls.
2. Insert both eyepieces into the tubes of the optical head. (Fig.
2)
3. Screw each objective into the thread of the nosepiece,
clockwise with increasing magnification. (Fig. 3)
4. Insert the power supply jack in the connector placed at the
rear side of the microscope. (Fig. 4)
Page 8
F ig. 1 F ig. 1
F ig. 2 F ig. 2
F ig. 3 F ig. 3
F ig. 4 F ig. 4