Descargar Imprimir esta página

Intended Use; Using The Rooftop Tent; Technical Description; Before First Use - Dometic TRT140 AIR Instrucciones De Montaje Y De Uso

Tienda de techo
Ocultar thumbs Ver también para TRT140 AIR:

Publicidad

Idiomas disponibles

Idiomas disponibles

Intended use

This rooftop tent is suitable for:
Mounting on a suitable roof rack on the rooftop of a suitable vehicle
Light to moderate weather
Touring
This rooftop tent is not suitable for:
Use by persons with reduced physical, sensory or mental capabilities
Very strong winds or snowfall
Seasonal pitch or commercial use
The ladder is intended for attaching to this rooftop tent. The ladder may
only be used in conjunction with this rooftop tent and may not be used
independently.
The ladder is not intended for professional use.
This product is only suitable for the intended purpose and application in
accordance with these instructions.
This manual provides information that is necessary for proper installation
and/or operation of the product. Poor installation and/or improper oper-
ating or maintenance will result in unsatisfactory performance and a possi-
ble failure.
The manufacturer accepts no liability for any injury or damage to the prod-
uct resulting from:
Incorrect assembly or connection, including excess voltage
Incorrect maintenance or use of spare parts other than original spare
parts provided by the manufacturer
Alterations to the product without express permission from the manu-
facturer
Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product
specifications.

Technical description

The rooftop tent is equipped with inflatable air poles which can be filled
using a single valve.
The ladder attached to the rooftop tent can be fitted to the height of the
vehicle.
The rooftop tent includes a high-density foam mattress.
For transport on the rooftop of a vehicle, the rooftop tent can be folded
down and covered with the supplied tent cover.
The roof rack on which the rooftop tent is to be installed has to meet the
following requirements:
The roof rack has to be able to carry at least 165 lbs/75 kg to allow for
driving with the rooftop tent installed.
The width of the roof rack has to be at least 27 in/68 cm.
The two rails of the roof rack have to be between 28 in/70 cm and
50 in/125 cm apart.
EN

Using the rooftop tent

!
WARNING! Risk of injury
Ensure that the rooftop tent is firmly attached to the roof
rack before climbing the ladder.
Ensure that each step of the ladder is locked before you
climb the ladder.
Always climb the ladder with caution.
Close the rooftop tent's entrance door before you go to
sleep to prevent falling out of the rooftop tent while
sleeping.
If two people use the rooftop tent ensure that they do
not both sit in the back or front or on one side of the tent
at the same time. The tent may fall down if the weight of
two people is on one side of the tent (fig. w, page 11).
Before driving with the mounted rooftop tent always
ensure that the cover is tied down correctly (fig. H,
page 13).
!
CAUTION! Risk of injury
Never open the zipper on the protective sleeve while an air
pole is inflated. This will result in the air pole bursting.
A
NOTICE! Material damage
Keep the side window of the rooftop tent open while
setting up or folding down the rooftop tent.
Do not open or close the zippers by force.
I
NOTE
Use the integrated storage facilities while using the tent, so
that nothing falls down or is forgotten in the tent when it is
folded down (fig. u, page 10).

Before first use

Familiarize yourself with the product by carrying out a test set up before
the product is used for the first time. Check if the scope of delivery is
complete.
Weathering your product before first use
The product is manufactured with materials that require preparation
before use to maximize its weatherproofing.
1. Fully set up the product outside when rain is expected or where you
can hose the outside of the product to become thoroughly wet.
This process is known as weathering. The weathering process tight-
ens the fabric, and allows the cotton in the sewing thread to swell and
fill the holes made by the sewing needle during the manufacturing
process.
2. Allow the product to dry thoroughly before packing away.
By following this process before first use, will ensure that the product
weatherproofing will improve with subsequent soakings.
4445103668
17

Publicidad

loading

Este manual también es adecuado para:

Rooftop trt 140 air