Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. PAIRING

TM
3.a. ANT+ PAIRING
Connect your ROTOR power meter with any device that's ANT+ compatible.
For a complete list of ANT+™ certified products, visit:
http://www.thisisant.com/directory/
Read the ANT+™ device manual for further instructions.
Pairing can be done both automatically or using the manual mode (recommended when other
ANT+™ power meters are close).
Before pairing ROTOR
away from any other ANT+™ power sensor. This will prevent accidental pairing with another
power sensor.
The ROTOR
INspider
remain properly paired.
3 .1. ACTIVATION PROCESS
.a
3.a.1.1.
To minimize battery consumption, the system is activated by applying a force to the
pedals of at least 2.5 kg. Riding a few meters is sufficient.
3.a.1.2.
Your ROTOR power meter is sending a radio signal and is ready to be paired and measure
data.
3. 2.
a. a. AUTOMATIC PAIRING
Once
the power meter
after two minutes), push the "SCAN" button on your ANT+™ device at the ANT+™ Power
screen. The "SCAN" button is usually placed in the menu:
Settings\Bike settings\Bike profiles\"Your profile"\ANT+ Power.
Wait for confirmation from the monitor.
INspider
with a monitor, make sure you are at least 10 meters (30 feet)
retains its "SENSOR ID"
is active and within two minutes of activation
TM
after charging or replacing the battery and will
(it enters sleep mode
Pairing
41

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido