Frequently Asked Questions - ROTOR INspider ROT117 Manual De Usuario

9. FREQUENTLY ASKED QUESTIONS

9.1. GENERAL
ROTOR INp ower vs INpower ® 2
ROTOR INp ower measures ®
generated by the left leg. The power value that's
shown is the result of extrapolation (default operation
to multiply by two) power measured in the left leg.
ROTOR 2INpower® keeps INpower® technology and
adds strain gauges to the drive-side crank, which
allows the measurement of the power applied by each
leg independently.
ROTOR INspider measures in the spider instead of in
the axle or crank, consequently measuring combined
power produced by the two legs while pedaling.
The three power meters provide ROTOR's special
metrics OCA, OCP and TORQUE 360.
What ANT+™ devices is ROTOR INspider power
meter compatible with?
They are listed in the ANT+ directory:
http://www.thisisant.com/directory/
Which Bluetooth Smart devices is ROTOR INspider ®
compatible with?
Any Bluetooth® Smart device is compatible with
ROTOR INspider, from mobile phones to computers,
with the complete range of Bluetooth® Smart cycle
devices in between.
What am I going to find in the
box?
When buying an INspider you'll find, in addition to
the spider power meter, one USB cable for battery
charging, an installation and a
and a TrainingPeaks postcard. Training Peaks has
® vs INspider ?
in the spindle power
INspider product
manual,
User Software
offered ROTOR customers a free premium account
subscription for one month. Visit the website
trainingpeaks.com/ROTOR to obtain the maximum
How does ambient temperature affect power
measurements?
Ambient temperature does not positively or negatively
affect how INspider works. INspider gives accurate
and stable power measurement independently of
changes in temperature during a ride (e.g. long climbs
with higher temperatures at the bottom and lower
temperatures at the top).
Can I disassemble the elements of my power
meter?
No. Inadequate handling of the product will
invalidate the warranty.
The only parts that can be disassembled are those
that are involved in installing and uninstalling
the cranks on the bicycle. Read the user manual
carefully before handling the product.
Never try to disassemble the plastic covers that
protect the electronics inside the spider. These
covers ensure sealing too and manipulation could
break the seal.
How to charge the battery?
Read the user manual for proper battery charging.
Open the dust cover in the external cover to find the
charging port. C nnect the magnetic connector from o
the USB cable included in the box. Make sure that the
LED around the charging port blinks yellow or green.
The LED will turn off when charging is complete.
Frequently asked questions 53