Sd Memory Card - Continental ContiPressureCheck Manual De Instrucciones

Configuration
Startup settings
Nominal pressure
Help
REDI sensor
Release

SD memory card

Slot for SD memory card
The SD memory card is supplied with the Hand-Held Tool by default.
►
If no SD memory card is inserted in the Hand-Held Tool, the memory
card is either defective or the software was not correctly installed, only
"ENGLISH" is available.
►
Storing of DTCs and log files is not possible without an SD memory card.
Handling data on the SD memory card
Access to the SD memory card takes place via a USB connection to the PC as described
under "Connection to PC".
►
Failure to observe the specifications on handling files on the SD memo-
ry card can lead to malfunction and total failure of the Hand-Held Tool
or the system.
►
The directory structure and naming as well as the content of the files
may not be changed.
►
Do not erase any files on the memory card!
The log files ("\REPORT") are an exception and can be copied and delet-
ed without affecting the system.
Hand-Held Tool
Should the Hand-Held Tool display the settings (on / off) each
time it is switched on?
Set / adjust the target pressure in the "Check all tires" menu
(on / off).
Should the help pages be displayed after the set time has
elapsed (off / 5s / 10s)?
Should REDI sensors be processed (yes / no)?
Display of the Hand-Held Tool software version.
81