Important Safety Instructions - Anker 760 Manual Del Usuario

How Should You Store the Expansion Battery?
If the expansion battery is stored at a low capacity for a long time, lithium batteries will self-consume power
which may lead to a quick discharge. This often leads to poor conductivity and a reduced battery lifespan that
causes the battery not to work.
When storing your expansion battery, please make sure that you:
1) Turn off all the outputs.
2) Store the expansion battery in a dry and cool environment.
3) Check the remaining battery capacity each week. If there are only 2 LED lights on, this means that the battery level is
below 30%. Please charge the expansion battery to full. Don't forget to charge it to 100% once every 3 months.
Specifications
Capacity 51.2Vdc, 2048Wh
Expansion Battery Port Input 40A Max
Expansion Battery Port Output 80A Max
Discharging Temperature -4°F-104°F / -20°C-40°C
Charging Temperature 32°F-104°F / 0°C-40°C
44.3 × 26.8 × 23.8 cm
Size
17.44 × 10.6 × 9.4 in
Net Weight 45.6 lb / 20.7 kg
Notice
Not permitted on aircraft.

IMPORTANT SAFETY INSTRUCTIONS

WARNING - When using this product, basic precautions should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose the product to rain or snow.
• Use of an attachment not recommended or sold by the product manufacturer may result in a risk of fire, electric
shock, or injury.
• Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or
injury.
• Do not use the product or attachment that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion, or risk of injury.
• Do not operate the product with a damaged cable.
• Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or electric shock.
• Do not expose the product to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause
explosions.
• To reduce the risk of electric shock, unplug the expansion battery from the power station before attempting any
instructed servicing.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure
that the safety of the product is maintained.
• When charging a device, the product may feel warm. This is a normal operating condition and should not be a
cause for concern.
03 EN
• When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
• Do not clean the product with harmful chemicals or detergents.
• Misuse, dropping, or excessive force may cause product damage.
• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems
separate from each other.
• Do not use or store the expansion battery in direct sunlight for a long period, such as in a car, cargo bed, or
any other place where it will be exposed to high temperatures. Doing so may cause the product to malfunction,
deteriorate, or generate heat.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
• Disposal of a battery into a fire or hot oven, or mechanically crushing or cutting off a battery, can result in an
explosion.
• Leaving a battery in an extremely high-temperature environment can result in an explosion or leakage of
flammable liquid or gas.
• A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas.
Storage and Maintenance Instructions
1. Store the product between 32°F-104°F (0 °C -40 °C ). Avoid exposing the product to rain or using the product in
a humid environment.
2. To preserve the battery lifespan, charge to 100% after using. If you plan to store your expansion battery,
recharge to 100% every 3 months.
3. Keep the product on a flat surface when using, charging, and storing.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d'en compromettre le fonctionnement.
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A1780111-85 is in compliance with Directives
2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet
address: https://www.anker.com
EN 04