Important Safety Instructions - Anker A2568 Manual Del Usuario

EN
LED Indicators
Solid white for 3 seconds,
then turn off
Light up one by one,
then turn off
/
Flash white
Only LED lights on the two sides
flash white
• This wireless charger is not compatible with non- •
MagSafe phone cases, such as Otterbox Defender cases.
T
• • It is not advised to charge a phone on the earbuds
charging area.
• • When the angle between the phone charging part and
the base is less than 40°, the wireless earbuds charging
function will turn off automatically for safety.
• • Connect the wireless charger to a Quick Charge 2.0/3.0
or Power Delivery wall adapter. Do not connect to a
5V/1A wall charger or a USB port on a computer as it
may affect the wireless charging function.
• • Do not place any foreign objects between your device
and the wireless charger's surface, including metal pads
on a car mount, magnetic cards, door keys, coins, NFC
cards, or other metal objects, as they could potentially
demagnetize the wireless charger, affect the charging
speed, or cause overheating.
01
Status
Connected to power
Charging your phone
Charging your earbuds
Metal objects detected
- Overvoltage or undervoltage
protection
- Incompatible AC adapter
connected, indicating that
you need to switch to a Quick
Charge 2.0/3.0 or Power
Delivery adapter
• • Wireless chargers make charging more convenient
than wired chargers, but confined by current wireless
technology, their charging speed is slower than that of
wired chargers.
• • High temperatures will reduce charging speed and
restrict power. It is recommended that you charge your
device in environments with temperatures below 40°C /
104°F.

Important Safety Instructions

Please refer to the electrical and safety information
on the bottom before installing or operating the product.
• • Avoid dropping.
• • Do not disassemble.
• • Do not expose to liquids.
• • This product is suitable for moderate climates only.
• • The maximum ambient temperature during use of this product
must not exceed 40°C.
• • Open flame sources, such as candles, must not be placed on this product.
• • Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Warning:
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
02