34
www.electrolux.com
Do not use an extension hose if the inlet hose is too short. Contact the
service centre for the replacement of the inlet hose.
16.4 Water-stop device
16.5 Water drainage
There are different procedures to connect the drain hose:
With the plastic hose guide.
A
•
Connect the water inlet hose to the cold
water tap with 3/4" thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
The inlet hose has a water stop device. This
device prevents water leaks in the hose
because of its natural ageing.
The red sector in the window «A» shows this
fault.
If this occur, close the water tap and contact
the service centre to replace the hose.
•
Make a U shape with the drain hose.
On the edge of a sink
•
Make sure that the plastic guide cannot
move when the appliance drains. Attach
the guide to the water tap or the wall.