Descargar Imprimir esta página

Set The Blade Height; Operation; Start The Machine; Stop The Machine - GreenWorks MO10B00 Manual Del Operador

Ocultar thumbs Ver también para MO10B00:

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
7.5

SET THE BLADE HEIGHT

The machine can be set to different blade heights.
1. Push the height adjustment button (7), move the
height adjust gear to a higher position to increase
the blade height.
2. Push the height adjustment button, move the height
adjust gear to a lower position to decrease the blade
height.
8

OPERATION

Wear eye protection during operation.
7
WARNING
English
8.1

START THE MACHINE

1
2
1. Connect the machine into an approved outdoor
extension cable.
2. Push and hold the start button (2).
3. While you hold the start button, pull the bail switch
(1) in the direction of the handle bar.
4. Release the start button to start the machine.
8.2

STOP THE MACHINE

1. Release the bail switch to stop the machine.
Wait until the blades fully stop before you start the
machine again. Do not quickly turn the machine off
and on.
Always disconnect from the power supply after you
complete the work.
10
WARNING
WARNING

Publicidad

loading

Este manual también es adecuado para:

Lma127