Install The Grass Catcher; Install The Mulch Plug; Set The Blade Height - GreenWorks MO10B00 Manual Del Operador

2. Tighten the lower handle with the quick-release
FR
levers (10) on the two sides.
3. Tighten the upper handle with the cam locks (11)
and knobs (12) on the two sides.
Make sure that the two handles are in the same
position.
AVERTISSEMENT
Do not make damage to the cables when you fold or
unfold the handle.
7.3

INSTALL THE GRASS CATCHER

1. Remove the mulch plug.
2. Open the rear discharge door and hold it.
3. Hold the the grass catcher (8) by its handle and
engage the hooks (14) on the slots (13).
4. Close the rear discharge door.
REMARQUE
14
13
Français
7.4

INSTALL THE MULCH PLUG

6
8
4
1. Remove the grass catcher.
2. Open the rear discharge door (6) and hold it.
3. Hold the mulch plug (4) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
7.5

SET THE BLADE HEIGHT

The machine can be set to different blade heights.
1. Push the height adjustment button (7), move the
height adjust gear to a higher position to increase
the blade height.
2. Push the height adjustment button, move the height
adjust gear to a lower position to decrease the blade
height.
24
7