Publicidad
Idiomas disponibles
Idiomas disponibles
-Mount the new saw blade at reverse order, be ensure that the direction of rotating of the saw blade is the
same as the rotating direction of the machine ( see the arrow of rotation direction at the housing ).
After fixing the saw blade (3) with the flange bolt (26) rotate the saw blade a few rotation by hand in order
to check if the saw blade freely spinning, this check has to be performed in all possible mitre and cut-cross
positions.
CLEANING AND MAINTANCE
Always pull out the mains power plug before starting any cleaning work. Cleaning Keep all safety devices,
air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low pressure.
• We recommend that you clean the device immediately each time you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the
device. The ingress of water into an electric tool increases the risk of an electric shock. Carbon brushes In
case of excessive sparking, have the carbon brushes checked only by a qualified electrician. Important! The
carbon brushes should not be replaced by anyone but a qualified electrician. Maintenance
• There are no parts inside the equipment which require additional maintenance.
• Lubricate all moving parts at regular intervals. Storage Store the equipment and accessories out of
children's reach in a dark and dry place at above freezing temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its original packaging.
ENVIRONMENT
Do not dispose of electric tools, accessories and packaging together with household waste material -
in observance of European Directive 2012/19/EU on waste of electric and electronic equipment and its
implementation in accordance with national law, electric tools that have reached the end of their life must
be collected separately and returned to an environmentally compatible recycling facility.
GB
10
Publicidad
