Publicidad
Idiomas disponibles
Idiomas disponibles
6.Do not use a saw blade which is cracked, deformed or dull.
7.Only use saw blades with a hole diameter which fits the tool spindle without play; never use reducers or
adapters to fit large-hole saw blades.
8.Protect accessories from impact, shock and grease.
DURING USE
1.Do not force the tool; apply light and continuous pressure.
2.Keep fingers, hands and arms away from the rotating saw blade.
3.Push spindle-lock button only when tool is at a standstill.
4.When slotting, ensure that the saw blade does not get jammed in the work piece.
5.If the saw blade becomes blocked, switch off the tool immediately and disconnect the plug; only then
remove the wedged work piece.
6.In case of jamming or electrical or mechanical malfunction, immediately switch off the tool and
disconnect the plug.
7.If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect
the plug.
8.Never use the tool when cord is damaged; have it replaced by a qualified person.
LASER RADIATION
1.Do not look into the laser beam (laser radiation).
2.Do not point the laser beam at persons or animals.
3.Do not use any magnifying optical tools (such as magnifying glasses, telescopes, or binoculars)
to view the laser beam.
4.Do not operate the tool in the presence of flammable liquids, gases or dust.
5.Do not operate the tool with children around.
6.Do not replace the installed laser with another laser type.
AFTER USE
1.After switching off the tool, never stop the rotation of the accessory by a lateral force applied against it.
2.Only remove cut-offs or other parts of the work piece from the cutting area when all moving parts have
come to a complete standstill.
3.The saw blade becomes very hot during use; do not touch it before it has cooled down WHEN
CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
4.Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of
the plug.
5.If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left
unattended. .
OPERATING INSTRUCTION
1.Upper handle
2.Guard release knob
3.Saw blade
4.Lower guard
5.Foot base
6.Base
7.Table lock handle
8.Mitre angle scale
9.Turning table
6
GB
Publicidad
