• It is normal that your spa liner may appear as if it is losing air. Changes in ambient temperature may change the internal air pressure in the liner.

• When detaching the pump from the liner, to avoid water coming out from the pipes, block the air pipe by screwing on the cap and installing the stoppers

on the debris screens.

COVER

• The cover shall be cleaned inside and outside periodically, using a gentle detergent for the PVC material.

FILTER CARTRIDGE

• To optimize the performance of the filtration system, check and clean your filter cartridge every day.

• We recommend changing your filter cartridge every week or replacing it if after washing, the filter cartridge remains soiled and discolored.

WATER

Many pollutants in the water settle on surfaces below the water line. These pollutants can cause bacterial, algal or fungal growth. It is recommended that

spas are cleaned as regularly as necessary. After a time, tenacious stains or biofilms may develop on the accessible surfaces below the water line or high

concentrations of salts or unwanted reaction by-products may also occur. Depending on hygienic condition, cleanliness, visibility, odour, debris and

stains, it is recommended to change the water completely and clean/disinfect the spa. When emptying the spa, the regulations and the instructions for

draining the water shall be observed.

• Keeping your spa water clean and chemically balanced is necessary. Simply cleaning the filter cartridge is not enough for proper maintenance, we

recommend to use using pool chemicals to maintain water chemistry and chlorine or bromine tablets (do not use granules) with the chemical dispenser.

• Water quality will be directly related to frequency of use, number of users and overall maintenance of the spa. The water should be changed every

3 days if there is no chemical treatment being performed with the water. It is highly recommended to use tap water for spa filling to minimize the

influence of unwanted contents, such as minerals.

• We recommend you take a shower before using your Lay-Z-Spa, as cosmetic products, lotions, and other residues on the skin can quickly degrade

water quality.

• Don't throw chemical products directly in the water; the chemical will deposit on the bottom of the spa and damage the material and discolor the PVC.

Chemical Tablets (Not Included):

• Remove the chemical dispenser from spa when the spa is in use.

• After performing chemical maintenance and before using the spa, use a test kit (not included) to test the water chemistry. We recommend maintaining

your water chemical balance as the following:

• Spa damage resulting from misuse of chemicals and mismanagement of spa water is not covered by the warranty.

• Pool chemicals are potentially toxic and should be handled with care. There are serious health risks from chemical vapors and the incorrect labeling and

storage of chemical containers.

• Please consult your local pool or chemical supply retailer for more information about chemical maintenance. Pay close attention to the chemical

manufacturer's instructions.

• Over usage of chemicals will discolor the printing and all points of the spa material; in the worst case, it will damage the structure of the spa liner.

7.4-7.6

DISASSEMBLY AND STORAGE

DRAINING

• To drain the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not to scale.

DRYING

• After draining the spa, some water remains inside the spa pump, liner chamber, massage chain and inflatable cover. Make sure that all above parts of

spa are completely dry. This is essential to extend the life of the spa and to avoid creation of mildew.

• The water inside the liner chamber and the inflatable cover come from the humidity in the air used to inflate them. The quantity of water may vary

depending on the percentage of humidity in your area.

• To dry the different parts of the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product.

Not to scale.

CLEANING

• Detergent residues and dissolved solids from bathing suits and chemicals may build up on the spa walls. Use soap and water to clean the walls and

rinse thoroughly. Do not use hard brushes or abrasive cleaners.

DEFLATING

Only For Inflatable Spas:

• Your spa is equipped with a deflation function to remove all the air from inside the chamber to make it easier to pack and store.

• To deflate the spa, follow the drawings inside the manual. Drawings are for illustration purposes only. May not reflect actual product. Not to scale.

REPAIRING

For PVC Material：

If the spa is torn or punctured, use the provided PVC repair patch and follow the below steps:

• Clean the area to be repaired. Carefully peel patch.

• Press patch over the area to be repaired.

• Wait 30 seconds before inflation.

For Duraplus

PVC Material:

If the spa is torn or punctured, use the provided PVC patch and glue (not included) and follow the below steps:

• Clean and dry the area to be repaired.

• Cut the provided PVC patch to appropriate size.

• Use glue (not included) to coat the one side of the newly cut patch. Make sure the glue is evenly distributed. Wait for 30 seconds and then place the cut

patch with glue over the damaged area.

• Smooth out any bubbles of air that may be trapped underneath, and press firmly for two minutes.

• Wait 30 minutes before inflation.

STORAGE

• Remove all accessories and make sure that spa liner, inflatable cover, pump and accessories are completely clean and dry before storing. If spa is not

completely dry, mold may result and will damage the spa liner during the storage period.

• Fold the spa liner only if the environment temperature is above 10ºC / 50ºF. If spa is not completely dry, mold may result and will damage the pool liner.

• Store the spa in a dry place with a moderate temperature between 10ºC (50ºF) and 38ºC (100ºF).

• We strongly recommend positioning the spa liner and inflatable cover inside a carton box, to better protect the PVC material during winter months.

Total Alkalinity

80-120ppm

Free Chlorine

2-4ppm

Tabla de Contenido