Descargar Imprimir esta página

Ardea Mobility CN220 Manual De Instrucciones página 45

Publicidad

Idiomas disponibles

Idiomas disponibles

A) Speed regulator
• The speed adjustment knob allows you to pre-select the scooter speed.
• Turn the knob in a clockwise direction to increase the speed.
• Turn the knob in an anti-clockwise direction to reduce the speed.
• It is advisable to select a speed at which you feel safe, comfortable and in control of your scooter.
B) Key
• The key serves to switch the scooter on and off.
• Insert the key.
• Turn the key through 90° in a clockwise direction to switch on the scooter. It will beep and the
needle on the battery indicator will move to indicate that the scooter is switched on.
• Return the key to the vertical position to switch off the scooter.
NOTE:
Always remove the key before getting off the scooter and before lowering the handlebar.
C) Horn
• Press this button to sound the horn.
D) Control lever
• This allows the scooter to be used with one hand only.
• It controls the forward and reverse speed.
DRIVING
• to drive forwards:
- use the fingers of your right hand to pull back the accelerator lever on the right;
- use your left thumb to push the accelerator lever on the left.
NOTE:
Always bring the scooter to a complete stop before changing direction from forward to
reverse or from reverse to forward.
• to drive in reverse:
- use the fingers of your left hand to pull back the accelerator lever on the left;
- use your right thumb to push the accelerator lever on the right.
NOTE:
When the accelerator control lever is completely released, it returns automatically to
the central stop position and activates the scooter brakes, bringing the scooter to a complete
stop. You will hear a "click" when the brake is on.
E) Battery indicator
• Indicates the available battery level.
• GREEN: fully charged.
• YELLOW: care must be taken because the battery is at half charge.
• RED: the battery is at less than half charge.
F) Four direction indicators
Press the button once to activate simultaneous flashing of both direction indicators; flashing is
accompanied by an acoustic signal. Press again to deactivate them.
G) Switching on the lights
Press the button once to switch on the lights.
H) Direction indicators
Press one of the two buttons (right or left), depending on the turn direction you want to pre-
signalise, to activate the flashing of the respective turn signal. Press again to turn it off.
13

Publicidad

loading

Productos relacionados para Ardea Mobility CN220