Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death..
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, your common sense and appropriate technical
suitability/training are and will remain the most important safety factor for error-free operation of
the machine. Safe working primarily depends on you!
TRANSPORT
Due to the weight and dimensions of the machine, two persons are required for transport.
Care must also be taken when transporting the grinding tools. Improper transport can cause
them to undergo changes that reduce their strength properties, so that safety is no longer
guaranteed. In particular, when transporting grinding tools, for example between storage, tool
preparation and machine, there is a risk of mechanical damage, including knocks, vibrations or
falls, resulting in cracks. For this very reason, grinding wheels must not be rolled.
ASSEMBLY
14.1 Checking Delivery Content
Visible transport damage must be noted immediately on the delivery note in
accordance with the warranty provisions, otherwise the goods are deemed to have
been properly accepted.
Open the packaging carefully upon receipt of the delivery and check that all parts are in order.
Complain damages and/or missing parts immediately to your retailer.
14.2 Setting Up the Machine
Choose a level, vibration-free surface with the appropriate amount of space as the installation
location. The installation site must also meet the ergonomic requirements of a workplace.
HOLZMANN MASCHINEN GmbH
WARNING
CAUTION
www.holzmann-maschinen.at
NOTE
NOTE
Procedure:
Mount the machine on a suitable base or
workbench using mounting holes in the base.
(The recommended height of the workpiece
support is 70 to 80 cm above the floor).
If necessary, connect the dust collecting nozzle
to a suitable extraction system (Ø A1: 48 mm, Ø
A2: 39 mm).
TRANSPORT
23
DSM200DS