General Operation - Wellell Optima Auto Manual Del Usuario

Optima Auto Series / English
4. Operation
NOTE- Always read the instructions before use.

4.1. General Operation

Switch the power switch on the side of the pump and press power key to turn it on.
4.1.1. Pre-set program
(1). Choose "TICK" and press the knob to enter the pre-set program, and then the pump will run itself
automatically.
(2). Enter setting to set your prefer Mode and Cycle time.
(3). Once the pump identifies the size of the mattress via the quick connector, it starts to inflat the
mattress. The initial inflaction takes about 30 minutes.
Perform pre-set program:
Mode  Alternating
Cycle time  10 mins.
10