Wellell Optima Auto Manual Del Usuario página 15

Optima Auto Series / English
10 mins
C. Tuning
Original
setting
NOTE- The pressure in the air cells can be manually adjusted for patient comfort by entering
the tuning mode in the lower right corner of the LCD screen
NOTE- Slide one hand underneath the air cell where the patient's buttock locates to ensure
that the given air pressure is appropriate. Always leave a space for about 2.54 cm (1 inch)
between the patient and the cell to prevent bottoming-out.
4.2. Internet of Things Service (IoT, available only with Optima Auto Link)
The Optima Auto Link is an IoT-technology-enabled device. This IoT device streams the pump or
mattresses' real-time conditions via a cloud-based platform named KeepWell.
For the IoT device, the LCD displays a signal icon that shows the
current strength.
For more detail, please refer to the manual of the cloud-based
platform: "KeepWell—streamline operation, logistics, and customer service for your business."
NOTE- Use this device in places where 4G LTE NETWORK coverage is good to ensure optimal
IoT services.
NOTE- Consult with the service provider or the manufacturer for the cellular communication
service provider.
4.3. Emergency CPR Operation
CPR knob is located at the patient's left-hand side of the
mattress near the head area. When there is a need to perform
CPR on the patient, quickly turn the CPR knob to release air
from mattress. The quick connector on the pump unit can be
disconnected for even faster deflation.
15 mins
Decrease mattress
pressure
20 mins 25 mins
Increase mattress
pressure
.
12
Back to previous page
Back to previous
page