Wellell Optima Auto Manual Del Usuario página 28

Optima Auto Series / English
3 V/m
80 MHz - 2.7 GHz
80 % AM at 1 kHz
Radiated RF EM
Fields
380 - 5800 MHz,
IEC61000-4-3
9-28 V/m,
Pulse modulation or
FM ±5 kHz deviation ,
(1kHz sine)
NOTE 1: U is the a.c. mains voltage prior to the application of the test level
T
NOTE 2: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 3: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people
MHz between
80 % AM at 1 kHz 0,15 MHz and
80 MHz
80 % AM at 1
kHz
10 V/m
80 MHz - 2.7
GHz
10 V/m
80 % AM at 1
80 MHz - 2.7 GHz
kHz
80 % AM at 1 kHz
380 - 5800
380 - 5800 MHz,
MHz,
9-28 V/m,
9-28 V/m,
Pulse modulation
Pulse
or FM ±5 kHz
modulation
deviation, (1kHz
or FM ±5 kHz
sine)
deviation,
(1kHz sine)
25
commended separation
distance calculated from
the equation applicable to
the frequency of the
transmitter.
Recommended separation
distance
= 150kHz to 80MHz
d
=0.6 80MHz to
d
800MHz
=1.2 800 MHz to
d
2.7GHz
Where P is the maximum
output power rating of the
transmitter in watts (W)
according to the
transmitter manufacturer
and d is the
recommended separation
distance in meters (m).
Field strengths from fixed
RF transmitters, as
determined by an
electromagnetic site
a
survey , should be less
than the compliance level
in each frequency ranged.
Interference may occur in
the vicinity of equipment
marked with the following
symbol:
b