Failures And Solutions - Bluewheel IX7 Manual De Instrucciones

Failures and Solutions

1. The display board is working but the motor doesn't work.
Reason analysis
a) The brake handle is
damaged
b) The speed regulating
steering
c) The motor is damaged
2. Charging doesn't work
Reason analysis
a) The battery charging
port is loose
b) The connection of the
charger plug is not well
3. Can't turn on the scooter
Reason analysis
a) The battery is dead
b) The power button is
out of order
Solutions
Pull out the socket of the brake handle (normally open
type brake handle). If the motor works, then it is the failu-
re of brake handle. In this case replace the brake handle.
Firstly check the speed regulating steering handle and if
the motors hall switch have a short circuit or not. Gene-
rally, a short circuit is caused easily through rain. Observe
the short circuit of steering handle and the motor hall
switch. Otherwise there will be a continuous damage of
the replacement controller.
If the motor doesn't turn on, please inspect the motors
hall switch and turning handles signal. Once the power
is on, the controller shell gets very hot. Generally, this re-
sults a short circuit of the controller internal power tube.
In this case you should immediately cut off the power.
Solutions
Change the charging port
Change the charger connector
Solutions
Charge the scooter for 1-2 hours according to the user
manual
Check the power button, if it is stuck or not.
38