Directions For Use; Control Operation - Guardian Technologies H980W Instrucciones De Uso Y Cuidado

FILLING -
Make sure unit is unplugged.
1. Before first use, lift tank
off base and remove tape
from float arm. Remove
the tank lid.
5. WATER REFILL INDICATOR
When the unit is low on water the power button will blink until the unit is refilled or turned off.
Simply add more water to continue use. Unit will automatically resume running when water tank
has been refilled.

CONTROL OPERATION

Power Button
Before turning on make sure there is water in the unit. Press the Power Button.
Night light
Press once to turn on the 7 color night light. Continue to press up to 8 times
to circulate through and select a color. The 9th press turns the light off.
The nightlight can be used independently from the humidifier.
Mist Control Button
Speed 2 is the default speed when the unit is turned on.
Press Mist Control button to cycle through the speeds 1, 2 and 3.
Mist Levels: 1 = Orange 2 = Green 3 = White

DIRECTIONS FOR USE

2. Pour cool, clean water directly into
the tank using a water pitcher.
Fill to-max-line on Mist Tube.
4. Add a few drops of your favorite essential oil to the
pad in the tray. (Oil not included)
WARNING: DO NOT add oils or other additives
directly into the water tank. Add only to the pad in
the tray. Oils added to the tank will damage the tank
and the whole unit. Any use of such additives in the
tank will void the manufacturers warranty.
Pureguardian essential oils and replacement pads
sold separately at www.guardiantechnologies.com
3. Return the tank lid.
E-5