Descargar Imprimir esta página

WERKU WK403150 Instrucciones Originales página 2

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
ENG
CE DECLARATION CONFORMITY.
Werku
declares that the WK403150 sander is
®
in accordance with the European Directives and
Standards 2006/42/CE, 2006/95/CE, 2004/108/CE,
EN55014-1:2017, EN55014-2:2015, EN61000-3-
2:2014, EN61000-3-3:2013, EN62841-1:2015+AC:15
and EN62841-2-4:2014.
La Coruña, 01/11/2020
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency 230V~50Hz
Class II
Protection index IP20
system
Speed rate 6000-12000 min
speeds
Base sizes 187x90mm
sizes 230x90mm
Orbit diameter 2mm
weight 1.9 kg
Acoustic pressure LpA <73
dB(A)
Respective uncertainity KpA 3 dB(A)
Acoustic pressure LwA <84 dB(A)
uncertainity KwA 3 dB(A)
Respective uncertainity Kh 1.50 m/s².
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
Failure to follow all warnings and instructions
listed below may result in electrical shock, fire
and/or serious injury
instructions for future reference
avoided in many cases by recognizing a potentially
hazardous situation before it occurs and by
observing appropriate safety procedures
use this sander for other applications than those
specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
and dark areas invite accidents
power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dusts
Keep away from children and curious while
operating a power tool
you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
common sense when operating a power tool
Do not use a power tool while tired or under
the influence of drugs, alcohol or medicines
moment of inattention while operating power tools
may cause damage serious personal.
Power 240W
Exhaust
-1
Sandpaper
Respective
Vibration Ah <2.5 m/s²
Keep all warnings and all
Accidents can be
Cluttered
Do not handle
Distractions can cause
USE PPE'S.
Use protection glasses according EN166
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
times
tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
your hair, clothing and gloves away from moving
parts
caught in moving parts
connecting means for extracting and collecting
dust, make sure they are connected and properly
6
used
related hazards.
Net
ELECTRICAL SAFETY.
The plug of the power tool must match with the
base of the socket
way
Do not use any adapter plug with earthed
power tools
bases will reduce the risk of electric shock
body contact with grounded surfaces such as
pipes, radiators, cookers and refrigerators
is an increased risk of electric shock if your body
is grounded
wet conditions
increase the risk of electric shock
DO NOT ABUSE THE CORD.
Do not
Never use the cord to carry, lift or unplug the
power tool
oil, sharp edges or moving parts
or entangled cords increase the risk of electric
shock
use an extension cord suitable for outdoor use
The use of an extension cord suitable for
outdoor use reduces the risk of electric shock
If the use of a power tool in a damp location is
unavoidable, use a power protected by a residual
current device (RCD)
reduces the risk of electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in "off" position before
connecting to the network, or when taking or
A
carrying the power tool
with your finger on the switch or plugging in
power tools that have the switch in "on" position
2
English
This enables better control of the power
Loose clothes, jewelry or long hair can be
If there are devices for
The use of these devices can reduce dust
Never modify the plug in any
Unmodified plugs and matching
Do not expose power tools to rain or
Water entering the power tool will
Keep the cord away from heat,
When operating a power tool outdoors,
The use of an RCD
Carrying power tools
Use
If required by
Keep
Avoid
There
Damaged

Publicidad

loading