Technical Data - Metabo MA-MS 25 Manual Original

en ENGLISH
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
f

16. Technical Data

Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
Measured values determined with cordless
multifunction drive MA 36-18 LTX BL.
L = Guide rail length
max
L = Usable blade cutting length
v = Chain speed in idling
K
K = Sawing chain, spacing
T
K = Sawing chain, number of driving links
A
K = Sawing chain, driving link thickness
T
V = Oil reservoir volume
Oil
m = weight (without cordless multifunction
drive, battery pack, oil, guide rail, saw
chain, shoulder strap)
Measured values determined in conformity with
EN 62841 + EN ISO 11680-1.
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C
Recommended ambient temperature when
charging: 0 °C to 40 °C
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Total vibration value (vector sum of three
directions):
a = vibration emission value (front handle)
h,1
a = vibration emission value (rear handle)
h,2
K = uncertainty (vibration)
h
Typical A-effective perceived sound levels:
L = sound pressure level
pA
18
L = sound power level
WA
K , K = uncertainty
pA WA
L = measured sound power level as per 2000/
WA(M)
14/EC
L = guaranteed sound power level as per
WA(G)
2000/14/EC
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!