Taking A Measurement - MedLinket ESM201 Manual Del Usuario

10. Taking a Measurement

Please follow the below steps to take a blood pressure measurement after
preparation is finished. (List blood pressure is mmHg for example).
10.1. Place the cuff on the arm at heart level (preferably the left arm).
Sit quietly during measurement.
At heart level
10.2. Press the ON/OFF button, the device will turn on and LCD dis-
play will show all segments for 1 second. The "
blinking briefly and the cuff will start to inflate automatically. It is
normal for the cuff to feel very tight.
Blood Pressure Monitor
ON/OFF button
Note: If you wish to stop inflation at any time, press the ON/OFF
button again.
10.3. When the correct pressure is reached, the pumping stops and
the pressure falls gradually. The pulse icon
pulse signal is detected.
Note: If an appropriate pressure
is not obtained, the device starts
to inflate again automatically.
Data
Time
SYS
mmHg
DIA
mmHg
Pulse
/minute
Blood Pressure Monitor
English 17
" is displayed
Data
Time
SYS
mmHg
mmHg
kPa
1
DIA
2
mmHg
MEM
Pulse
/minute
Blood Pressure Monitor
will flash when the
01/10
20： 30
mmHg
1