Applied parts of the product:
Applied parts of the product include foot and body electrodes.
1.4.2 Electrodes:
The electrode is made of medical-grade hydrogel and carbon film, which is of
biocompatibility.
Specification
Dimensions
Electrode impedance
Service life
Transport and storage environment
(1) Maintenance and cleaning
Electrodes should be always clean on their surfaces, without any dirt, oil, sticky
substance, etc., otherwise, their viscosity will decrease.
Dirty electrodes could be cleaned with clean water and then dried in air for a period
of time of use.
(2) Storage conditions
• Please keep the electrodes out of the reach of children.
• Please store them in a dry and well-ventilated place, and keep them away from
direct sunlight, high temperature or humidity.
• Please never try to disassemble, repair or modify the electrodes, otherwise an
accident or malfunction may occur.
(3) Instructions on use of electrodes
• Please clean your skin thoroughly before each use of the electrodes, since the
lotion, makeup or dirt left on the body skin will cause the poor application of
electrodes.
• Please apply the electrodes to your body parts with a pain.
• Please shut down the electric pulse outlet before application of electrodes to your
body skin.
Instructions
70x52 mm
150Ω±10%
2 years
Temperature: 0~45℃
Relative humidity: ≤80%RH
Atmospheric pressure: 50~106kPa