Publicidad
Idiomas disponibles
Idiomas disponibles
7. Attach LATCH/UAS connectors
to vehicle's LATCH/UAS anchors
and listen for audible "click" to
confirm engagement. LATCH/
UAS strap should lie flat and not
be twisted.
8. Tighten the LATCH/UAS strap.
Press down firmly in the center of
the car seat while tightening the
LATCH/UAS strap. You may need
to tighten through the opening in
the cover by the belt path shown,
by by pulling it through and up.
pulling it through and up.
9. Test for tightness. Grab the seat
at the forward-facing belt path.
Try to move the car seat side-to-
side and front-to-back with the
force of a firm handshake. If the
seat moves less than 1 in (2.5 cm),
it is tight enough.
by grasping the top or back of
the car seat.
48
own,
DO NOT
test
Radian® 3RX
7
8
9
Publicidad
