Mounting The Loop Handle - Stihl FS 130 Manual De Instrucciones

English / USA
14
15
15
14
15
Fitting the Throttle Cable
Do not kink the throttle cable or lay
it in tight radii – make sure the
throttle trigger moves freely.
:
Press the throttle cable (14) into the
retainers (15).
Throttle Cable Adjustment
:
Go to chapter "Adjusting the
Throttle Cable".
24
Swiveling the Handlebar
Transport position:
:
Release the wing screw (3) and
unscrew it until the handlebar (7)
can be turned clockwise.
:
Turn the handlebar 90° and then
swing the handles down.
:
Tighten down the wing screw firmly.
Working position:
:
Reverse the sequence described
above to swing the handles up
and turn the handlebar counter-
clockwise.

Mounting the Loop Handle

2
1
Loop handle with barrier bar
:
Insert square nuts (1) in the
barrier bar (2).
:
Line up the holes.
FS 130, FS 130 R
1