ROTOR ROT112 Manual De Usuario página 40

ZEROING pROCESS
40
To zero your ROTOR Power:
1.
Activate the system and
place the right crank in a 6
o'clock vertical position as
shown in the picture.
Calibrate your ROTOR
Power with your pedals
mounted in the cranks.
Do not place any other
weight in your cranks until
zeroing process is finished.
Do not move your cranks
during steps 2, 3, 5 and 6.
2. Follow the specific
instructions of your ANT+™
computer device to send
the "CALIbRAtE" signal.
USER MANUAL - CALIBRATION/ZEROING
The "CALIBRATE" button is usually placed in the
menu:
Settings\Bike settings\Bike profiles\"Your profile"\ANT+Power.
3. Read the feedback value for the drive side crank
from your device. For correct zeroing the value
should be between: 100-3900.
4. Repeat step 1 for left crank.
5. Repeat step 2 to send the "CALIBRATE" signal.
6. Read the feedback value for the non-drive side
crank from our device. For a correct zeroing the
value should be between: 4200-8100.
There is no need to zero your ROTOR Power every
time you ride.
It is recommended to repeat the calibration process
after an adjustment period of 30 hours riding aprox.
For more information about the zeroing process, user
utilities and training options visit our web:
www.power.rotorbike.com