Battery Replacement - ROTOR ROT112 Manual De Usuario

BATTERY REPLACEMENT

No tools are required to replace the batteries. It is
recommended that you change both batteries at the
same time.
Replacement process:
1. Open the cover of the battery cover turning it
counter-clockwise by hand.
2. Extract the old battery from the housing.
Trick:
If you cannot remove the battery easily by hand use a
magnet to take it out.
Do not use any tool or sharp object.
WARNING
Do not extract the white foam from the inner side
of the battery cover. It can produce connectivity
failures with the battery.
42
USER MANUAL - BATTERY REPLACEMENT
3. Place a new battery into the housing with the
positive "+" side facing out.
4. Thread the battery cover screwing it clockwise by hand.
WARNING
Do not throw the old batteries away
with normal waste, batteries should
be disposed of properly according
to local regulations.
Cover
Battery housing