Parkside PSSSA 20-Li B2 Traducción Del Manual De Instrucciones Original página 33

Trouble shooting
Turn off the appliance and, before doing any servicing, remove the battery.
Risk of electric shock!
Problem
Appliance won't
start
Intermittent
operation
Poor sawing per-
formance
Saw blade quickly
becomes blunt
Possible cause
Battery (14) not inserted
Battery (14) discharged
On/Off switch (3) defective
Motor defective
Internal loose contact
On/Off switch (3) defective
Saw blade (4.1/4.2/
11.1/11.2) is blunt
Incorrect sawing speed
Low battery power
Too much pressure applied
Sawing speed too high
Corrective action
Insert battery (14) (Observe the se-
parate operating instructions for the
rechargeable battery and charger)
Recharge battery (14) (Observe the
separate operating instructions for the
rechargeable battery and charger)
Send in to Service Centre for repair
Send in to Service Centre for repair
Insert a new saw blade (4.1/
4.2/11.1/11.2)
Adjust sawing speed
Charge the battery (14) (observe
the separate operating instructions
for the battery and charger)
Reduce the pressure
Reduce the sawing speed
GB IE
33