Equipment Supplied; Operation; Inserting The Adapter - Sartorius Slice 50 Instrucciones De Instalación

4

Equipment Supplied

Item
Sartocon Slice 50 Adapter set, consisting of:
®
Adapter
Filter holder
CIP block
Stand
Installation Instructions
5

Operation

5.1

Inserting the Adapter

Requirements
The operator is prompted to use one or more adapters on the screen of the
control unit.
Procedure
NOTICE The device can malfunction due to the use of unsuitable filters!
t
Ensure that the filters are suitable for the device (for suitability, see
chapter "2.1 Intended Use", page 5).
Loosen the filter holder clamp by lifting the handle (2) and pull the pres-
t
sure plate (1) forward.
1
2
Lower only the adapter (1) from above into the filter holder (2).
t
The holes in the filter holder must be facing towards the crossflow
y
module. The letters engraved on top of the adapter should be the right
way up when looking from above.
1
2
Installation Instructions Sartocon
Equipment Supplied
Quantity
1
4
4
4
1
1
Slice 50 Adapter
®
11