Descargar Imprimir esta página

Symbols Used; Warnings In Operation Descriptions; Other Symbols; Safety Instructions - Sartorius Slice 50 Instrucciones De Instalación

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

1.4

Symbols Used

1.4.1

Warnings in Operation Descriptions

WARNING
Denotes a danger with risk that death or severe injury may result if it is not
avoided.
NOTICE
Denotes a danger that can result in property damage if it is not avoided.
1.4.2

Other Symbols

Required action: Describes actions that must be carried out.
t
The actions in the sequence must be carried out in succession.
Result: Describes the result of the activities carried out.
y
2

Safety Instructions

2.1

Intended Use

The Sartocon
Slice 50 Adapter
®
UF | DF Module. The device is suitable for the crossflow filtrations
"ultrafiltration" (UF) and "diafiltration" (DF).
For the control of the filtration processes, only the control unit and the
Ambr
crossflow software may be used. The filtration processes can be
®
automated using the Ambr
subsequent Software versions must be installed.
If processes are used for the filtration processes whose phases or process
steps differ from the predefined processes in the Ambr
e.g., when operating a feed pump in reverse operation: A specific risk assess-
ment must be carried out for the filtration processes in order to exclude
hazards from the differing processes.
Only Sartocon
Slice 50 filters may be used in the device. The filters in the
®
adapter are designed for single-use and must be disposed of after use. The
holder and adapter can be cleaned in place and reused.
The device is exclusively designed for use according to these instructions.
Any further use beyond this is considered improper.
If the device is not used properly: The protective systems of the device may
be impaired. This can lead to unforeseeable personal injury or property
damage.
Installation Instructions Sartocon
Safety Instructions
is designed for use in the Ambr
crossflow software. Software Release 8 or
®
Slice 50 Adapter
®
Crossflow
®
Crossflow software,
®
5

Publicidad

loading