Publicidad
Idiomas disponibles
Idiomas disponibles
Approach 2: Using the Line-Array Speaker Manager application for setup without performing a sound
simulation
The following shows a connection example for using the speakers in a large conference room or classroom.
Connect the speakers with Dante compatible audio devices using Ethernet cables. Via a network switch ( ), connect
the speakers with such devices as follows:
• Beamforming microphone ( )
• Conference microphone system ( )
• Digital signal processor ( ) that has, among others, a wireless microphone ( ) and a video conference system ( )
connected
Configuration
1
Join the speakers together (page 11).
2
Connect audio devices to the speakers, and then the speakers to AC outlets with the power cords.
3
Mount the speakers on a wall (page 17).
4
Connect a computer to one of the speakers using an Ethernet cable and make setup of the speaker,
such as speaker placement and beam control, as well as equalizer setup with the Line-Array Speaker
Manager application (page 15).
8
GB
Publicidad
