Publicidad
Idiomas disponibles
Idiomas disponibles
Approach 3: Using the DIP switch for setup
The following shows a connection example for using the speakers in a medium size conference room with easy setup.
Connect the speakers with Dante compatible audio devices using Ethernet cables. Via a network switch ( ), connect
the speakers with such devices as follows (To use Dante devices, you need to specify the input source, in advance,
with the Line-Array Speaker Manager application (page 15).):
• Conference microphone system ( )
• Digital signal processor ( ) that has, among others, a wireless microphone ( ) and a video conference system ( )
connected
Configuration
1
Select one of the preset beam control settings with the DIP switch (page 16).
2
Connect audio devices to the speakers, and then the speakers to AC outlets with the power cords.
3
Mount the speakers on a wall (page 17).
9
GB
Publicidad
