DAITEM 230-21X Manual De Instalación página 134

1. Introduction
IMPORTANT
• Some functions are only available with versions 2.0.0 or later
(press
• The operating differences with former ranges are described in the compatibility booklet
available in the Daitem installers section at www.daitem.co.uk.
The external universal
transmitter is fitted with:
• a terminal block n° 1, for
connecting NC or NO
type external intrusion
contacts or command
contacts for system
control,
• a terminal block n° 2, for
connecting a Daitem
technical probe,
• an internal test button,
• an internal test LED
indicator lamp.
IMPORTANT: the two terminal blocks cannot be used at the same time.
134
on the control panel keypad to check the version).
LED
indicator
lamp
Anti-tamper
protection
against opening
Applications
Intrusion detection
Fire detection
Technical detection
System control
Test button Terminal block n° 1
Terminal block n° 2
Terminal block to be used
n° 1
n° 1
n° 2 (specific to Daitem technical probes)
n° 1
Cable
gland