DAITEM 230-21X Manual De Instalación página 142

5.3 Configurations for a detector type application
Configuration Parameter
type no.
1/ Type 1
of external
sensor(s)
2/ Type 2
of detector
3/ 90 sec. 3
inhibition
4/ Alarm level 4
142
Configuration options
Sensor without entrance NO
contact supervision
Sensor without entrance NC
contact supervision
Sensor with entrance NO contact supervision
Sensor with entrance NC contact supervision
Roller blind/shutter sensor
Technical probe
Detector not protecting an entrance
to the home
Detector protecting an entrance
to the home
Roller blind/shutter detector
Fire detector
Technical detector
Disabled
Enabled
Intrusion
Prealert
Deterrence
Warning
Parameter
value
6 Applications other than door and window
detectors in the home
7(*) Applications other than door and window
detectors in the home
8 Door and window detector in the home
9 Door and window detector in the home
12 Roller blind/shutter detector
13 Household damage detection
1(*) Motion detector
Gate/side door opening detector
Glassbreak detector
Shock contact
Pressure mat
Infrared barrier
2 Door and window detector
3 Roller blind/shutter detector
5 Fire detector
6 SONIN Daitem flood detector
SONCS Daitem mains power failure detector
SONPC Daitem freezer breakdown detector
SONHG Daitem freeze detector
1 No inhibition
2(*) 90 sec. detector inhibition after 1
1(*) Alarm level managed by the control panel
2
3
4
(*) default parameter settings
Application
transmission
st