Bosch IR LD 1.0 CO2 Manual Del Operario página 24

3. Safety instructions
All safety instructions are to be
read thoroughly before using the
IR LD 1.0, and they must be ob-
served.
•
Avoid operating the IR LD 1.0
in direct sunlight and areas of
excessive dust, high humidity,
high temperature, large temper-
ature fluctuations or magnetic
fields.
•
Do not attempt to repair the
IR LD 1.0
•
The IR LD 1.0 display may only
be cleaned with a soft cloth
and neutral cleaning agents.
•
The IR LD 1.0 operates on a
lithium-ion type battery. For
long battery life and safe opera-
tion, observe all warnings.
•
For prolonged and safe opera-
tion, always ensure to charge
the IR LD 1.0 battery between
ambient temperatures of 0 °C
and 45 °C.
•
Disconnect the charger from
the power source when not in
use or charge is complete.
•
Do not try to access the bat-
tery; contact Bosch customer
service for battery replace-
ment.
•
Do not subject the IR LD 1.0 to
impact. Do not deform, pierce,
or damage the battery.
•
Only use a charger certified ac-
cording to local guidelines with
an output rating of 5V DC 1A.
Bosch Automotive Service Solutions GmbH
Safety instructions | IR LD 1.0 | 23 | en
WARNING
Risk of fire or explosion!
¶
¶
¶
WARNING
Risk of injury!
¶
¶
DANGER
Risk of fire!
¶
¶
Do not disassemble or
attempt to repair the
battery or protective
circuit.
Do not expose the bat-
tery to temperatures
above 60° C (140° F)
Do not leave the
IR LD 1.0 in a hot
vehicle or under direct
sunlight.
Do not touch a battery
that appears to be leak-
ing or damaged.
If battery fluid gets in
your eyes, flush with
fresh water, seek medi-
cal attention; do not rub
eyes.
Do not use the
IR LD 1.0 in the vicin-
ity of spilled or open
containers of gasoline
or other flammable
substances.
The IR LD 1.0 is de-
signed to operate in
nor mal or non-hazard-
ous environments. Do
not use this equipment
in hazardous/explosive
environments.
SP01502142 | 14.03.2022